Victorian Numbered Regulations Victorian Numbered RegulationsS.R. No. 23/2017
═════════════
STATUTORY RULES 2017
S.R. No. 23/2017
Equipment (Public Safety) Act 1994
Equipment (Public Safety) Regulations 2017
The Governor in Council makes the following Regulations:
Dated: 26 April 2017
Responsible Minister:
ROBIN SCOTT
Minister for Finance
ANDREW ROBINSON
Clerk of the Executive Council
[1] Reg. 4(a): S.R. No. 53/2007 as amended by S.R. No. 55/2014.
[2] Reg. 4(b): S.R. No. 55/2014.
——
Fee Units
These Regulations provide for fees by reference to fee units within the meaning of the Monetary Units Act 2004.
The amount of the fee is to be calculated, in accordance with section 7 of that Act, by multiplying the number of fee units applicable by the value of a fee unit.
The value of a fee unit for the financial year commencing 1 July 2016 is $13.94. The amount of the calculated fee may be rounded to the nearest 10 cents.
The value of a fee unit for future financial years is to be fixed by the Treasurer under section 5 of the Monetary Units Act 2004. The value of a fee unit for a financial year must be published in the Government Gazette and a Victorian newspaper before 1 June in the preceding financial year.
Penalty Units
These Regulations provide for penalties by reference to penalty units within the meaning of section 110 of the Sentencing Act 1991. The amount of the penalty is to be calculated, in accordance with section 7 of the Monetary Units Act 2004, by multiplying the number of penalty units applicable by the value of a penalty unit.
The value of a penalty unit for the financial year commencing 1 July 2016 is $155.46.
The amount of the calculated penalty may be rounded to the nearest dollar.
The value of a penalty unit for future financial years is to be fixed by the Treasurer under section 5 of the Monetary Units Act 2004. The value of a penalty unit for a financial year must be published in the Government Gazette and a Victorian newspaper before 1 June in the preceding financial year.
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter is included in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
|
Statutory rule provision |
Title of applied, adopted or incorporated document |
Matter in applied, adopted or incorporated document |
|
Regulation 5, definition of AMBSC Code and item 1(b) of Schedule 1 |
AMBSC Code Part 1, Issue 8—2012, Copper boilers, published by the Australian Miniature Boiler Safety Committee in 2012 AMBSC Code Part 2, Issue 5—2012, Steel boilers, published by the Australian Miniature Boiler Safety Committee in 2012 AMBSC Code Part 3, Issue 1—2006, Sub-Miniature boilers, published by the Australian Miniature Boiler Safety Committee in 2006 AMBSC Code Part 4, Issue 1—2010, Duplex steel boilers, published by the Australian Miniature Boiler Safety Committee in 2010 |
The whole |
|
Regulation 5, definitions of AS 2030—Gas Cylinders, gas cylinder and regulation 45(2)(b)(i) |
AS 2030.1-2009, Gas cylinders, Part 1: General requirements, published by Standards Australia in 2009 AS 2030.2-1996, The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases, Part 2: Cylinders for dissolved acetylene, published by Standards Australia in 1996, |
The whole |
|
Statutory rule provision |
Title of applied, adopted or incorporated document |
Matter in applied, adopted or incorporated document |
|
|
reissued in 2000 incorporating Amendment Nos 1 and 2 AS 2030.4-1985, The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases, Part 4: Welded cylinders—Insulated, published by Standards Australia in 1985, reissued in May 1999 incorporating Amendment No. 1 AS 2030.5-2009, Gas cylinders, Part 5: Filling, inspection and testing of refillable cylinders, published by Standards Australia in 2009, reissued in 2015 incorporating Amendment No. 1 |
|
|
Regulation 5, definitions of "boiler", pressure piping" and "pressure vessel, regulation 45(2)(a) and (b) and item 1(c) of Schedule 1 |
AS 4343-2014, Pressure equipment—Hazard levels, published by Standards Australia in 2014 |
|
|
Regulation 5, definitions of "boiler", pressure piping and pressure vessel |
AS/NZS 1200, Pressure equipment, as published by Standards Australia and Standards New Zealand in 2015 |
Appendix E |
|
AS/NZS 3509:2009, LP Gas fuel vessels for automotive use, published by Standards Australia and Standards New Zealand in 2009 |
The whole |
|
|
Statutory rule provision |
Title of applied, adopted or incorporated document |
Matter in applied, adopted or incorporated document |
|
AS 2971-2007, Serially produced pressure vessels, published by Standards Australia in 2007 |
The whole |
|
|
Regulation 45(2)(f) and item 8 of Schedule 1 |
AS 3533.1-2009, Amusement rides and devices—Part 1: Design and construction, published by Standards Australia in 2009, reissued in 2011 incorporating Amendment No. 1 |
The whole |