Commonwealth Numbered Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

NATIONAL TRADE MEASUREMENT REGULATIONS 2009 (SLI NO 233 OF 2009) - REG 3.4

Approach to weighbridge

         (1)   An approach to a weighbridge must:

                (a)    have a hard, true and durable surface of concrete or another approved material; and

               (b)    have a perimeter that is clearly indicated by painted marks or other approved means; and

                (c)    be arranged so that drainage from the surface of the approach does not flow into the pit; and

               (d)    be in the same plane as the platform for a minimum distance of either of the following:

                          (i)    if the length of the platform is less than 18 metres -- 3 metres;

                         (ii)    if the length of the platform is 18 metres or more -- 1 metre.

         (2)   The approach to a platform of a weighbridge that is the entry or exit end of the entire weighbridge is in the same plane as the platform or platforms of the weighbridge if:

                (a)    the surface of the approach is, for its entirety, contained within an angle of no more than +/- 0.25 degrees of level (horizontal) measured from the end of the nearer end of the weighbridge; and

               (b)    for a multi-platform weighbridge -- the dead space, if applicable, between the platforms of the weighbridge is level and in the same plane as each of the platforms.



AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback