Commonwealth Numbered Regulations

NATIONAL TRADE MEASUREMENT REGULATIONS 2009 (SLI NO 233 OF 2009) - REG 2.29

         (1)   If an inspector makes a verification mark on a material measure that:

                (a)    is not a glass measure; and

               (b)    has a denomination of more than 0.2 metric carat or more than 50 mg;

the inspector must also mark on the material measure, in the approved manner, the date on which the inspector's mark is made.

         (2)   If a servicing licensee makes a verification mark on a material measure that:

                (a)    is not a glass measure; and

               (b)    has a denomination of more than 0.2 metric carat or more than 50 mg;

the servicing licensee must also mark on the material measure, in the approved manner, the date on which the servicing licensee's mark is made.

         (3)   If an employee of a servicing licensee makes a verification mark on a material measure that:

                (a)    is not a glass measure; and

               (b)    has a denomination of more than 0.2 metric carat or more than 50 mg;

the employee must perform each of the actions mentioned in subregulation (4).

         (4)   For subregulation (3), the employee must:

                (a)    make the servicing licensee's verification mark on the material measure; and

               (b)    mark on the material measure, in the approved manner, the date on which the servicing licensee's mark is made; and

                (c)    make a mark on the measuring instrument that will enable the servicing licensee to identify the employee who made the servicing licensee's mark.